S&S Cummins 10mm Stroker CP3 – New 6.7 based – (22% over stock displacement)
Just like the injector selection charts that S&S provides to help you select the proper selection for your power goals, selection of your injection pump setup to match your injectors capabilities is very important. A 14MM pump with stock injectors would not only be difficult to tune but a waste of parts capabilities the same way 450%+ injectors would be paired with a single stock injection pump. Below is a rough guide on the pumps capabilities in a single pump application, if you’re running or intending to run multiple pumps, adding the capabilities together or what you’re using is a safe bet – for instance – a stock 8.2mm CP3 paired with a 10mm stroker CP3 would be capable of roughly 1400RWHP+/-.
- STOCK (8.2MM) CP3 = 600RWHP+/-
- 10MM STROKER CP3 = 800RWHP+/-
- 12MM STROKER CP3 = 1000RWHP+/-
- 14MM STROKER CP3 = 1200RWHP+/-