Hardway PerformanceHardway Performance

FLEECE PERFORMANCE

FLEECE PERFORMANCE

Items 1 to 10 of 49 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Descending Direction
  1. 63mm Holset Fleece Cheetah Turbocharger 1994-2007 Cummins

    63mm Holset Fleece Cheetah Turbocharger 1994-2007 Cummins

    $1,939.88

    Core Policy

    • This product has a required core charge. For more details read our Core Policy.
    • You must fill out this Core Return Form when you receive your product.

    Learn More
  2. FLEECE FPE-DPK-67-36-10 DUAL PUMP KIT (WITH POWERFLO 750 PUMP)

    FLEECE FPE-DPK-67-36-10 DUAL PUMP KIT (WITH POWERFLO 750 PUMP)

    $2,699.00

    The Fleece FPE-DPK-67-36-10 Dual Pump Kit (With PowerFlo 750 Pump) will supply your 2013-2016 Dodge 6.7L Cummins with the fuel needed to maximize the performance of your Cummins engine. This kit is designed to fit perfectly, and comes with everything you need to get the job done right the first time. This kit is not only a simple and clean install, it also eliminates the need for an expensive dual pump controller, which is required with other kits.
    The Fleece Performance PowerFlo 750 CP3 is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications in just a single configuration. Not only will a single PowerFlo 750 pump support 750 RWHP, but it also eliminates the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effective upgrade will allow you to maintain desired fuel rail pressure through your entire RPM range.
    Learn More
  3. FLEECE FPE-DPK-67-36-10-DX DELUXE DUAL PUMP KIT (POWERFLO 750 PUMP)

    FLEECE FPE-DPK-67-36-10-DX DELUXE DUAL PUMP KIT (POWERFLO 750 PUMP)

    $2,999.00

    The Fleece FPE-DPK-67-36-10-DX Deluxe Dual Pump Kit with PowerFlo 750 Pump will supply your 2013-2016 Dodge 6.7L Cummins with the fuel needed to maximize the performance of your Cummins engine. This kit is designed to fit perfectly, and comes with everything you need to get the job done right the first time. This kit is not only a simple and clean install, it also eliminates the need for an expensive dual pump controller, which is required with other kits.

    The Fleece Performance PowerFlo 750 CP3 is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications in just a single configuration. Not only will a single PowerFlo 750 pump support 750 RWHP, but it also eliminates the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effective upgrade will allow you to maintain desired fuel rail pressure through your entire RPM range.
    The Deluxe Kit includes the Fleece Performance Fuel Distribution Block, and Fleece Fuel Distribution Block Hose & Fitting kit. This allows you to re-plumb your fuel system to get rid of unnecessary lines, and give you an even cleaner, custom look.
    Learn More
  4. FLEECE FPE-DPK-67-02-10-DX DELUXE DUAL PUMP KIT (POWERFLO 750 PUMP)

    FLEECE FPE-DPK-67-02-10-DX DELUXE DUAL PUMP KIT (POWERFLO 750 PUMP)

    $2,999.00

    The Fleece FPE-DPK-67-02-10-DX Deluxe Dual Pump Kit with PowerFlo 750 Pump will supply your 2010-2012 Dodge 6.7L Cummins with the fuel needed to maximize the performance of your Cummins engine. This kit is designed to fit perfectly, and comes with everything you need to get the job done right the first time. This kit is not only a simple and clean install, it also eliminates the need for an expensive dual pump controller, which is required with other kits.
    The Fleece Performance PowerFlo 750 CP3 is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications in just a single configuration. Not only will a single PowerFlo 750 pump support 750 RWHP, but it also eliminates the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effective upgrade will allow you to maintain desired fuel rail pressure through your entire RPM range.
    The Deluxe Kit includes the Fleece Performance Fuel Distribution Block, and Fleece Fuel Distribution Block Hose & Fitting kit. This allows you to re-plumb your fuel system to get rid of unnecessary lines, and give you an even cleaner, custom look.
    Learn More
  5. FLEECE FPE-DPK-67-79-10 DUAL PUMP KIT (WITH POWERFLO 750 PUMP)

    FLEECE FPE-DPK-67-79-10 DUAL PUMP KIT (WITH POWERFLO 750 PUMP)

    $2,699.00

    The Fleece FPE-DPK-67-79-10 Dual Pump Kit (With PowerFlo 750 Pump) will supply your 2007.5-2009 Dodge 6.7L Cummins with the fuel needed to maximize the performance of your Cummins engine. This kit is designed to fit perfectly, and comes with everything you need to get the job done right the first time. This kit is not only a simple and clean install, it also eliminates the need for an expensive dual pump controller, which is required with other kits.
    The Fleece Performance PowerFlo 750 CP3 is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications in just a single configuration. Not only will a single PowerFlo 750 pump support 750 RWHP, but it also eliminates the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effective upgrade will allow you to maintain desired fuel rail pressure through your entire RPM range.

    Learn More
  6. FLEECE 6.7L CP3K MODIFIED CP3 PUMP

    FLEECE 6.7L CP3K MODIFIED CP3 PUMP

    $1,179.00

    The Fleece Performance Cummins 6.7L CP3K is a modified CP3 pump designed to eliminate the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effective upgrade will allow you to maintain desired fuel rail pressure through your entire RPM range.

    FEATURES:

    • Eliminates Factory Fuel Flow Restriction
    • Maintains Rail Pressure Through Entire RPM Range

    Learn More
  7. FLEECE FPE-CUMM-CP3-10MM-6.7 POWERFLO 750 CP3

    FLEECE FPE-CUMM-CP3-10MM-6.7 POWERFLO 750 CP3

    $1,895.00

    Fleece FPE-CUMM-CP3-10MM-6.7 PowerFlo 750 CP3 is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications. Not only will it support 750 RWHP, but it also eliminates the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effective upgrade will allow you to maintain desired fuel rail pressure through your entire RPM range, as well as provide enough fuel to support 750rwhp.


    Every Fleece Performance CP3 is tested on our in-house engine simulator and pump test stand to simulate real world situations and ensure that each pump is ready to work for you!


    Features:
    Supports 750 RWHP
    Eliminates Factory Fuel Flow Restriction

    Not available for sale in the state of California Not available for sale in the state of California.

    Learn More
  8. FLEECE FPE-CUMM-CP3-10MM-5.9 POWERFLO 750 CP3

    FLEECE FPE-CUMM-CP3-10MM-5.9 POWERFLO 750 CP3

    $1,895.00

    The Fleece Cummins FPE-CUMM-CP3-10MM-5.9 PowerFlo 750 CP3 for your 03-07 Dodge 5.9L Cummins is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications. Not only will it support 750 RWHP, but it also eliminates the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effective upgrade will allow you to maintain desired fuel rail pressure through your entire RPM range, as well as provide enough fuel to support 750rwhp.

    Every Fleece Performance CP3 is tested on our in-house engine simulator and pump test stand to simulate real world situations and ensure that each pump is ready to work for you!"

    Features:
    Supports 750 RWHP
    Eliminates Factory Fuel Flow Restriction

    Not available for sale in the state of California Not available for sale in the state of California. \

    Learn More
  9. 2003-2007 2nd Gen Swap Kit (No Turbo)

    2003-2007 2nd Gen Swap Kit (No Turbo)

    $943.95

    2003-2007 2nd Gen Swap Kit (No Turbo) Learn More
  10. 2010-2012 2nd Gen Swap Kit (No Turbo)

    2010-2012 2nd Gen Swap Kit (No Turbo)

    $1,048.95

    2010-2012 2nd Gen Swap Kit (No Turbo) Learn More